Camera compatibility · No. 142 by models listed
i3 International cameras with MultiFusion
i3 International Inc lists 14 cameras in ONVIF's conformant products database, registered between 2023 and 2025. This page shows each model with the ONVIF profiles it declares, and what that means for MultiFusion today.
What works with MultiFusion
14 of the 14 i3 International models listed by ONVIF declare Profile S, the profile MultiFusion uses today. ONVIF has listed i3 International devices from 2023 to 2025.
- Profile SWorks today
Live video, PTZ, imaging and events
14 of 14 listed models declare it - Profile GPartial
Playback from camera storage
14 of 14 listed models declare it - Profile TNot yet
Newer media service
10 of 14 listed models declare it - Profile MNot yet
Analytics metadata
7 of 14 listed models declare it
Works with MultiFusion through ONVIF Profile S: live video, PTZ, imaging, events. Profile G is partial (playback from camera storage); Profiles T and M are not supported yet. Cameras without ONVIF can still be added by their RTSP stream address.
i3 International models in the ONVIF database
Every i3 International camera in ONVIF's conformant products database, with the profiles each one declares. Tick S to see the models that work with MultiFusion today.
14 models
| Model | Type | Profiles | ONVIF test date |
|---|---|---|---|
| M69B2 | Camera | S G M | 2025-12-17 |
| M69B8 | Camera | S G M | 2025-12-16 |
| M71 | Camera | S G T M | 2024-11-01 |
| M74 | Camera | S G T M | 2024-11-01 |
| M75 | Camera | S G T | 2025-02-17 |
| M75v2 | Camera | S G T | 2025-09-11 |
| M76 | Camera | S G T | 2025-02-15 |
| M76M | Camera | S G T | 2025-02-14 |
| M77R2 | Camera | S G T M | 2024-11-04 |
| M79 | Camera | S G | 2023-03-06 |
| M85 | Camera | S G T | 2025-02-17 |
| M85 v2 | Camera | S G T M | 2025-09-01 |
| M86 | Camera | S G T M | 2025-11-22 |
| M98 | Camera | S G | 2024-11-21 |
Conformance data: ONVIF conformant products database, as listed on 23 October 2026; data © ONVIF, Inc. The profiles shown are the ones each device declares in that database. ONVIF is a trademark of ONVIF, Inc.; camera brand and model names are trademarks of their owners and are used only to identify products. MultiFusion is not an ONVIF member product and these pages make no conformance claim for it. Before you buy, confirm your exact model with us.
Setting up i3 International cameras in MultiFusion
- Prepare the camera. Give it an IP address on a network MultiFusion Server can reach, turn ONVIF on in the camera's web page, and set a user name and password for ONVIF.
- Find it. In MultiFusion Server, open Cameras › Add a camera › Find on the network (ONVIF) and choose Search the network. Cameras on the same local network answer ONVIF discovery and appear in the list.
- Sign in and add. Pick the camera and enter its ONVIF user name and password. MultiFusion reads the camera's profiles and stream addresses and fills in the settings; choose how to record (continuous, on motion, on events or on a schedule) and select Add camera.
- Use PTZ. For a PTZ camera, the MultiFusion VMS tile shows pan, tilt and zoom controls, presets and preset patrols.
- Not found? Discovery does not cross subnets or VLANs that block multicast. Use the Stream address (RTSP) tab instead, enter the camera's RTSP address and select Test stream.
Questions about i3 International and MultiFusion
Does MultiFusion work with i3 International cameras?
Yes, through ONVIF Profile S. 14 of the 14 i3 International models in ONVIF's conformant products database declare Profile S, and MultiFusion uses Profile S today for live video, PTZ, imaging and events. Send us your exact model and firmware and we will confirm it.
Can MultiFusion play recordings stored on i3 International cameras?
Partly. Where a camera declares Profile G (14 i3 International models do), MultiFusion can find recordings on the camera's own storage and play them back. Recording on the MultiFusion server works for every camera MultiFusion can stream.
What about ONVIF Profiles T and M?
Support for Profile T (the newer media service) and Profile M (analytics metadata) is not supported yet; connect such cameras by RTSP. In the ONVIF listing, 10 i3 International models declare Profile T and 7 declare Profile M.
Is i3 International a MultiFusion partner?
No. This page restates facts from ONVIF's public database; it is not a partnership, an endorsement or a joint test. i3 International and its model names are trademarks of their owner and are used only to identify the products.
My model is not in the list. Can I still use it?
Often, yes. The list covers only the models a maker has registered with ONVIF. If your camera offers ONVIF Profile S or an RTSP stream, MultiFusion can usually connect to it. Tell us the model and we will confirm.
More camera brands
MultiFusion records and shows these cameras on MultiFusion Server, with operators in MultiFusion VMS. See also the standards MultiFusion uses, or ask us about your exact model.